国产精品成人无码久久久,国产精品丝袜久久久久久不卡,扒开双腿抽打花蒂惩罚室,亚洲成AV人片高潮喷水
簡體版
|
繁體版
首頁
關于我們
產品中心
海達新聞
技術文章
資料下載
公司相冊
聯系我們
產品分類
甲醛試驗箱
老化試驗箱
鹽霧試驗箱
恒溫恒濕箱試驗箱
紙箱包裝抗壓試驗機
紙箱全自動破裂試驗機
多功能拉力試驗機
淋雨試驗箱
UV紫外老化試驗箱
紙品包裝檢測測試儀器
振動試驗臺
跌落試驗機
包裝擠壓試驗機
剝離 膠粘帶測試儀器
箱包測試儀器
印刷檢測儀器設備
其他檢測儀器
鞋服紡織檢測儀器
光學坐標測量?jī)x器
辦公家具測試設備
聯系我們
廣東海達儀器有限公司(生產基地)
總 機:0769-88838200
手 機:13602382905(微信同號)
地 址:廣東省東莞市道滘鎮大羅沙大新街13號
郵 編:523185
昆山-湖南-重慶-廈門-湖北-福建-四川-江西-山東-陜西
公司網站:
http://m.koozuu.com/
公司郵箱(Emial):
haidads04@qc-test.com
技術文章
首頁
>>>
技術文章
海達儀器:辦公桌椅綜合測試介紹
海達儀器:辦公桌椅綜合測試介紹
辦公桌椅綜合測試儀
,辦公桌試驗機,辦公椅試驗機,辦公家具檢測試驗機
椅子測試儀器
測試項目:座面,靠背。
座椅座面的試驗方法
Test Method for Seat Chair and seatsurface:
1.
座面的靜載荷試驗:通過加載塊垂直向下施加一定力量于加載點上并保持至少
10
秒。并反復進行
10
次。
Seat Surface Static Load Test:
vertically down through the loading block to exert force on theload point and keep at least 10 seconds. And repeated 10times
2.
座面的疲勞試驗:通過載入墊,將
950N
的力和規定的次數垂直向下重復施加在座面載入點上。加載速率為每分鐘不超過
40
次。
Fatigue test of the seat: by loading pad, put 950N force and thespecified times to repeat vertically down impose to the load pointof the seat surface. Loading rate no more than 40 times perminute
3.
座面的沖擊試驗:將一塊泡沫塑料放在座面上,然后把座面沖擊器置于規定的高度,使其自由跌落,沖擊載入部位各
10
次。
Impact test of the seat: put a piece of foam on the seat surface,then place the impactor of the seat in a specified height and makeit fall freely. impact loading site 10 timeseach.
座椅靠背的試驗方法:
Test methods for back of the chair
1.
座背的靜載荷試驗:用擋塊靠住椅和凳子的腳上。然后將規定的平衡載荷施加于座面載入點上。再將規定的力沿著與椅背垂直的方向通過載入墊施加于載入點上。每次至少保持
10
秒。并反復進行
10
次。
Static Load Test for back of the chair: put the baffle on the chairleg. Then impose the specified balance loading to the load point ofthe seat. And then provides the force perpendicular to thedirection along the back pad by loading imposed on the load point.To keep at least 10 seconds each. And repeated 10times.
2.
座背的疲勞試驗:用擋塊靠住椅或者凳子的腳上,然后將
950N
的力垂直施加在座面載入點上,再通過椅背載入塊,將
330N
的力按規定的次數施加在椅背的載入點上。加載速率為每份鐘不超過
40
次。
Fatigue test of the seat back : use the block fixed the feet of thechair and then impose the 950N force vertically to the surface loadpoint, through the back loading block. Impose 330 N force withspecified times to the back loading site. Loading rate no more than40 times per minute.
桌子測試儀器
測試項目:桌子的穩定性和桌面沖擊。
1
、
垂直負載下的穩定性試驗:
Stability test of the vertical load
把試件放在試驗基面上。在其*不穩定桌邊中心離邊沿向內
50mm
桌面處通過載入墊垂直向下逐漸加力到規定的力值或者至少試件至少有一個桌腳離地為止。
Place test specimen on the base surface. Impose the force to thetable in its center from the edge of the most unstableinward
50mm
desktop vertically down through the loading pad gradually withaugmented the value or at least one specimen legs up off theground.
2.
垂直和水平載入穩定性試驗:
Vertical and horizontal load stabilitytest
把試件放在試驗基面上。用擋塊擋住試件*不穩定邊的桌腳。防止試件在試驗中移動。在該邊中心離邊沿向內
50mm
桌面處通過載入墊垂直向下施加
100N
的力。同時在該邊中心桌上向外施加一個水平力。逐漸增加該力到規定值或者至少有一個桌腳離地為止。
Put the specimen on the test-based surface. With the block blockingthe most unstable side of the specimen legs to prevent the testspecimen to move. The edge center from the edgeinward
50mm
desktop department
,
exert downward vertical 100N force by loadingpad. While exert a level force on the center desk of the edge,increase gradually to a specified value or one leg near to thefloor at least.
3.
垂直靜載荷試驗:
Vertical static load test
在桌面易于發生破壞的位置,按規定的力通過載入墊,垂直向下重復施加
10
次。每次至少應保持
10
秒。
On the most easy damaged position of the desk surface , to imposethe specified force by loading pad, vertical put down repeated 10times. Keep 10 seconds at least.
Desktop sustained vertical load test
椅子測試儀器
測試項目:座面沖擊
座面的沖擊試驗:將一塊泡沫塑料放在座面上,然后把座面沖擊器置于規定的高度,使其自由跌落,沖擊載入部位各
10
次。
Impact test of the seat: put a piece of foam on the seat surface,then place the impactor of the seat in a specified height and makeit fall freely. impact loading site 10 timeseach.
上一篇:
簡要介紹辦公家具測試(辦公家具測試設備)的基本項目
下一篇:
海達儀器油墨耐磨儀的加速規格及主要特征
Copyright@ 2003-2025
廣東海達儀器有限公司
版權所有
座機:0769-88838200 手機:13602382905
粵ICP備08009758號
粵公網安備 44190002002641號
人妻丰满熟AV无码区HD
|
色欲av精品人妻一区二区
|
国内精品久久久久影院一蜜桃
|
真人高清实拍女处被破的视频
|
高h之交换小敏系列
|
久久精品国产亚洲精品
|
无码国产色欲XXXXX视频
|
国内精品久久久久伊人av
|
强行无套内谢大学生初次水
|
日本熟妇色XXXXX日本免费看
|
内射人妻无码色av无码
|
再深点灬舒服灬太大了岳视频
|
亚洲欧美另类激情综合区蜜芽
|
精品人妻久久久久久888
|
国产免费久久精品99久久
|
精品国产一二三产品区别在哪
|
韩国精品福利一区二区三区
|
中文字幕无码精品三级在线电影
|
与亲女洗澡伦了东北
|
亚洲男女一区二区三区
|
亚洲欧美熟妇综合久久久久
|
国产偷窥熟女精品视频
|
少妇性夜夜春夜夜爽a片
|
熟妇人妻VA精品中文字幕
|
欧美日韩中文国产一区发布
|
色婷婷综合久久久中文字幕
|
亚洲AV日韩AV无码污污网站
|
初六苏梅全文免费阅读正版
|
狼色精品人妻在线视频网站
|
国内精品国产成人国产三级
|
国自产拍偷拍精品啪啪模特
|
亚洲日本中文字幕乱码在线
|
久久精品麻豆日日躁夜夜躁
|
性xxxx欧美老妇胖老太肥肥
|
亚洲国产精品无码久久
|
18禁免费无码无遮挡不卡网站
|
老男人把舌头伸进我下面
|
亚洲AV日韩精品久久久久久久
|
少妇富婆高级按摩出水高潮
|
97无码免费人妻超级碰碰夜夜
|
国产精品久久久久久吹潮
|